Did you know the following facts about lead?

FACT: Lead exposure can harm young children and babies even before they are born.

Lead Facts

Lead paint

FACT: Even children who seem healthy can have high levels of lead in their bodies.

FACT: You can get lead in your body by breathing or swallowing lead dust, or by eating soil or paint chips containing lead.

FACT: You have many options for reducing lead hazards. In most cases, lead-based paint that is in good condition is not a hazard.

FACT: Removing lead-based paint improperly can increase the danger to your family.

If you think your home might have lead hazards, read on to learn about lead and some simple steps to protect your family.

Health Effects of Lead

  • Childhood lead poisoning remains a major environmental health problem in the U.S.
  • Even children who appear healthy can have dangerous levels of lead in their bodies.
  • People can get lead in their body if they:
    • put their hands or other objects covered with lead dust in their mouths;
    • eat paint chips or soil that contains lead; or
    • breathe in lead dust, especially during renovations that disturb painted surfaces.
  • Lead is even more dangerous to children than adults because:
    • babies and young children often put their hands and other objects in their mouths. These objects can have lead dust on them;
    • children’s growing bodies can absorb more lead; and
    • children’s brains and central nervous systems are more sensitive to the damaging effects of lead.
  • If not detected early, children with high levels of lead in their bodies can suffer from:
    • damage to the brain and nervous system;
    • behavioral and learning problems (such as hyperactivity);
    • slowed growth;
    • hearing problems; and
    • headaches.
  • Lead is also harmful to adults. Adults can suffer from:
    • difficulties during pregnancy;
    • other reproductive problems (in both men and women);
    • high blood pressure;
    • digestive problems;
    • nerve disorders;
    • memory and concentration problems; and
    • muscle and joint pain

Where is Lead Found?

In general, the older your home, the more likely it has lead-based paint.

Paint

Many homes built before 1978 have lead-based paint. The federal government banned lead-based paint from housing in 1978. Some states stopped its use even earlier. Lead can be found:

  • in homes in the city, country and suburbs;
  • on apartments, single-family homes, and both private and public housing complexes;
  • on the interior and exterior of the house;
  • in the soil around a home.  Soil can pick up lead from exterior paint and other sources, such as past use of leaded gas in cars;
  • in household dust. Dust can pick up lead from deteriorating lead-based paint and from soil tracked into a home;
  • in drinking water. Your home might have plumbing that uses lead pipes or lead solder. Call your local health department or water supplier to find out about testing your water. You cannot see, smell or taste lead, and boiling your water will not get rid of lead. If you think your plumbing might have lead in it:
    • Use only cold water for drinking and cooking.
    • Run water for 15 to 30 seconds before drinking it, especially if you have not used your water for a few hours.
  • on the job. If you work with lead, you could bring it home on your hands or clothes. Shower and change clothes before coming home. Launder your work clothes separately from the rest of your family’s clothes;
  • in old (vintage or antique) painted toys and furniture;
  • in food and liquids stored in lead crystal, lead-glazed pottery and porcelain;
  • from lead smelters and other industries that release lead into the air;
  • with hobbies that use lead, such as making pottery or stained glass, or refinishing furniture.
  • in folk remedies that contain lead, such as “greta” and “azarcon” used to treat an upset stomach.

Where is Lead Likely to be a Hazard?

  • Lead from paint chips, which you can see, and lead dust, which you can’t always see, can be serious hazards.
  • Peeling, chipping, chalking and cracking lead-based paint is a hazard and needs immediate attention.
  • Lead-based paint may also be a hazard when found on surfaces that children can chew or that get a lot of wear-and-tear. These areas include:
    • windows and window sills;
    • doors and door frames;
    • stairs, railings and banisters; and
    • porches and fences.

Note: Lead-based paint that is in good condition is usually not a hazard.

  • Lead dust can form when lead-based paint is dry-scraped, dry-sanded, or heated. Dust also forms when painted surfaces bump or rub together. Lead chips and dust can get on surfaces and objects that people touch. Settled lead dust can re-enter the air when people vacuum, sweep or walk through it.
  • Lead in soil can be a hazard when children play in bare soil, or when people bring soil into the house on their shoes.

Checking Your Family and Home for Lead

  • Have your children and home tested if you think your home has high levels of lead.
  • Just knowing that a home has lead-based paint may not tell you if there is a hazard.

To reduce your child’s exposure to lead, get your child checked, have your home tested (especially if your home has paint in poor condition and was built before 1978), and fix any hazards you may have.

Your Family

  • Children’s blood lead levels tend to increase rapidly from 6 to 12 months of age, and tend to peak at 18 to 24 months of age.
  • Consult your doctor for advice on testing your children. A simple blood test can detect high levels of lead. Blood tests are important for:
    • children at ages 1 to 2;
    • children and other family members who have been exposed to high levels of lead; and
    • children who should be tested under your state or local health screening plan.

Your doctor can explain what the test results mean and if more testing will be needed.

Your Home

You can get your home checked in one of two ways (or both):

  • A paint inspection tells you the lead content of every different type of painted surface in your home. It won’t tell you whether the paint is a hazard or how you should deal with it.
  • A risk assessment tells you if there are any sources of serious lead exposure, such as peeling paint and lead dust. It also tells you what actions to take to address these hazards.

Have qualified professionals do the work. There are standards in place for certifying lead-based paint professionals to ensure that the work is done safely, reliably and effectively. Be sure to ask your InterNACHI inspector about lead paint during your next inspection. Trained professionals use a range of methods when checking your home, including:

  • a vsual inspection of paint condition and location;
  • a portable x-ray fluorescence (XRF) machine;
  • lab tests of paint samples; and
  • surface-dust tests.

Note: Home test kits for lead are available, but studies suggest that they are not always accurate. Consumers should not rely on these tests before doing renovations or to assure safety.

What You Can Do to Protect Your Family

If you suspect that your house has lead hazards, you can take some immediate steps to reduce your family’s risk:

  • If you rent, notify your landlord of peeling or chipping paint.
  • Clean up paint chips immediately.
  • Clean floors, window frames, window sills, and other surfaces weekly. Use a mop, sponge or paper towel with warm water and a general all-purpose cleaner, or a cleaner made specifically for lead.

REMEMBER: NEVER MIX AMMONIA AND BLEACH PRODUCTS TOGETHER, SINCE THEY CAN FORM A DANGEROUS GAS.

  • Thoroughly rinse sponges and mop heads after cleaning dirty and dusty areas.
  • Wash children’s hands often, especially before they eat, and before nap time and bed time.
  • Keep play areas clean. Wash bottles, pacifiers, toys and stuffed animals regularly.
  • Keep children from chewing window sills and other painted surfaces.
  • Clean or remove shoes before entering your home to avoid tracking in lead from soil.
  • Make sure children eat nutritious, low-fat meals high in iron and calcium, such as spinach and dairy products. Children with good diets absorb less lead.

In addition to day-to-day cleaning and good nutrition, you can temporarily reduce lead hazards by taking actions such as repairing damaged amd painted surfaces, and by planting grass to cover soil with high lead levels. These actions, called “interim controls,” are not permanent solutions and will need ongoing attention. To permanently remove lead hazards, you must hire a certified lead-abatement contractor. Abatement (or permanent hazard elimination) methods include removing, sealing or enclosing lead-based paint with special materials. Just painting over the hazard with regular paint is not enough. Always hire a person with special training for correcting lead problems — someone who knows how to do this work safely and has the proper equipment to clean up thoroughly. Certified contractors will employ qualified workers and follow strict safety rules set by their state or the federal government. To be safe, hire an InterNACHI inspector trained in lead detection for your next inspection.

Are You Planning to Buy or Rent a Home Built Before 1978?

Many houses and apartments built before 1978 have paint that contains lead (called lead-based paint). Lead from paint, chips and dust can pose serious health hazards if not taken care of properly. Federal law requires that individuals receive certain information before renting or buying pre-1978 housing.

  • Residential Lead-Based Paint Disclosure Program
    • LANDLORDS have to disclose known information on lead-based paint and lead-based paint hazards before leases take effect. Leases must include a disclosure form about lead-based paint.
    • SELLERS have to disclose known information on lead-based paint and lead-based paint hazards before selling a house. Sales contracts must include a disclosure form about lead-based paint. Buyers have up to 10 days to check for lead hazards.

If not conducted properly, certain types of renovations can release lead from paint and dust into the air.

  • Pre-Renovation Education Program (PRE)
    • RENOVATORS have to give you a pamphlet titled “Protect Your Family from Lead in Your Home” before starting work.
  • Take precautions before your contractor or you begin remodeling or renovations that disturb painted surfaces (such as scraping off paint or tearing out walls).
    • Have the area tested for lead-based paint.
    • Do not use a belt-sander, propane torch, heat gun, dry scraper or dry sandpaper to remove lead-based paint. These actions create large amounts of lead dust and fumes.
    • Lead dust can remain in your home long after the work is done.
    • Temporarily move your family (especially children and pregnant women) out of the apartment or house until the work is done and the area is properly cleaned. If you can’t move your family, at least completely seal off the work area.
    • If you have already completed renovations or remodeling that could have released lead-based paint or dust, get your young children tested and follow the steps outlined to protect your family.

Article information by Nachi.org

Signature Home Inspection is a Certified Home Inspection service located in California serving Orange County, San Diego County, Los Angeles County, Riverside County, Santa Clara County, San Mateo County, San Francisco County, Contra Costa County, and San Bernardino County California.

www.signaturemore.com                                               888-860-2688

Asbestos – What is Asbestos?

Asbestos is a mineral fiber that can be positively identified only with a special type of microscope. There are several types of asbestos fibers. In the past, asbestos was added to a variety of products to strengthen them and to provide heat insulation and fire resistance. InterNACHI inspectors can supplement their knowledge with the information offered in this guide.

How Can Asbestos Affect My Health?

From studies of people who were exposed to asbestos in factories and shipyards, we know that breathing high levels of asbestos fibers can lead to an

Asbestos Removal

Asbestos Removal

increased risk of lung cancer in the forms of mesothelioma, which is a cancer of the lining of the chest and the abdominal cavity, and asbestosis, in which the lungs become scarred with fibrous tissue.

The risk of lung cancer and mesothelioma increase with the number of fibers inhaled. The risk of lung cancer from inhaling asbestos fibers is also greater if you smoke. People who get asbestosis have usually been exposed to high levels of asbestos for a long time. The symptoms of these diseases do not usually appear until about 20 to 30 years after the first exposure to asbestos.

Most people exposed to small amounts of asbestos, as we all are in our daily lives, do not develop these health problems. However, if disturbed, asbestos material may release asbestos fibers, which can be inhaled into the lungs. The fibers can remain there for a long time, increasing the risk of disease. Asbestos material that would crumble easily if handled, or that has been sawed, scraped, or sanded into a powder, is more likely to create a health hazard.

Where Can I Find Asbestos and When Can it Be a Problem?

Most products made today do not contain asbestos. Those few products made which still contain asbestos that could be inhaled are required to be labeled as such. However, until the 1970s, many types of building products and insulation materials used in homes contained asbestos. Common products that might have contained asbestos in the past, and conditions which may release fibers, include:

  • steam pipes, boilers and furnace ducts insulated with an asbestos blanket or asbestos paper tape. These materials may release asbestos fibers if damaged, repaired, or removed improperly;
  • resilient floor tiles (vinyl asbestos, asphalt and rubber), the backing on vinyl sheet flooring, and adhesives used for installing floor tile. Sanding tiles can release fibers, and so may scraping or sanding the backing of sheet flooring during removal;
  • cement sheet, millboard and paper used as insulation around furnaces and wood-burning stoves. Repairing or removing appliances may release asbestos fibers, and so may cutting, tearing, sanding, drilling, or sawing insulation;
  • door gaskets in furnaces, wood stoves and coal stoves. Worn seals can release asbestos fibers during use;
  • soundproofing or decorative material sprayed on walls and ceilings. Loose, crumbly or water-damaged material may release fibers, and so will sanding, drilling or scraping the material;
  • patching and joint compounds for walls and ceilings, and textured paints. Sanding, scraping, or drilling these surfaces may release asbestos fibers;
  • asbestos cement roofing, shingles and siding. These products are not likely to release asbestos fibers unless sawed, dilled or cut;
  • artificial ashes and embers sold for use in gas-fired fireplaces, and other older household products, such as fireproof gloves, stove-top pads, ironing board covers and certain hairdryers; and
  • automobile brake pads and linings, clutch facings and gaskets.

Where Asbestos Hazards May Be Found in the Home

  • Some roofing and siding shingles are made of asbestos cement.
  • Houses built between 1930 and 1950 may have asbestos as insulation.
  • Asbestos may be present in textured paint and in patching compounds used on wall and ceiling joints. Their use was banned in 1977.
  • Artificial ashes and embers sold for use in gas-fired fireplaces may contain asbestos.
  • Older products, such as stove-top pads, may have some asbestos compounds.
  • Walls and floors around wood-burning stoves may be protected with asbestos paper, millboard or cement sheets.
  • Asbestos is found in some vinyl floor tiles and the backing on vinyl sheet flooring and adhesives.
  • Hot water and steam pipes in older houses may be coated with an asbestos material or covered with an asbestos blanket or tape.
  • Oil and coal furnaces and door gaskets may have asbestos insulation.

What Should Be Done About Asbestos in the Home?

If you think asbestos may be in your home, don’t panic.  Usually, the best thing to do is to leave asbestos material that is in good condition alone. Generally, material in good condition will not release asbestos fibers. There is no danger unless the asbestos is disturbed and fibers are released and then inhaled into the lungs. Check material regularly if you suspect it may contain asbestos. Don’t touch it, but look for signs of wear or damage, such as tears, abrasions or water damage. Damaged material may release asbestos fibers. This is particularly true if you often disturb it by hitting, rubbing or handling it, or if it is exposed to extreme vibration or air flow. Sometimes, the best way to deal with slightly damaged material is to limit access to the area and not touch or disturb it. Discard damaged or worn asbestos gloves, stove-top pads and ironing board covers. Check with local health, environmental or other appropriate agencies to find out proper handling and disposal procedures. If asbestos material is more than slightly damaged, or if you are going to make changes in your home that might disturb it, repair or removal by a professional is needed. Before you have your house remodeled, find out whether asbestos materials are present.

How to Identify Materials that Contain Asbestos
You can’t tell whether a material contains asbestos simply by looking at it, unless it is labeled. If in doubt, treat the material as if it contains asbestos, or have it sampled and analyzed by a qualified professional. A professional should take samples for analysis, since a professional knows what to look for, and because there may be an increased health risk if fibers are released. In fact, if done incorrectly, sampling can be more hazardous than leaving the material alone. Taking samples yourself is not recommended. If you nevertheless choose to take the samples yourself, take care not to release asbestos fibers into the air or onto yourself. Material that is in good condition and will not be disturbed (by remodeling, for example) should be left alone. Only material that is damaged or will be disturbed should be sampled. Anyone who samples asbestos-containing materials should have as much information as possible on the handling of asbestos before sampling and, at a minimum, should observe the following procedures:
  • Make sure no one else is in the room when sampling is done.
  • Wear disposable gloves or wash hands after sampling.
  • Shut down any heating or cooling systems to minimize the spread of any released fibers.
  • Do not disturb the material any more than is needed to take a small sample.
  • Place a plastic sheet on the floor below the area to be sampled.
  • Wet the material using a fine mist of water containing a few drops of detergent before taking the sample. The water/detergent mist will reduce the release of asbestos fibers.
  • Carefully cut a piece from the entire depth of the material using a small knife, corer or other sharp object. Place the small piece into a clean container (a 35-mm film canister, small glass or plastic vial, or high-quality resealable plastic bag).
  • Tightly seal the container after the sample is in it.
  • Carefully dispose of the plastic sheet. Use a damp paper towel to clean up any material on the outside of the container or around the area sampled. Dispose of asbestos materials according to state and local procedures.
  • Label the container with an identification number and clearly state when and where the sample was taken.
  • Patch the sampled area with the smallest possible piece of duct tape to prevent fiber release.
  • Send the sample to an asbestos analysis laboratory accredited by the National Voluntary Laboratory Accreditation Program (NVLAP) at the National Institute of Standards and Technology (NIST). Your state or local health department may also be able to help.

How to Manage an Asbestos Problem

If the asbestos material is in good shape and will not be disturbed, do nothing! If it is a problem, there are two types of corrections: repair and removal. Repair usually involves either sealing or covering asbestos material. Sealing (encapsulation) involves treating the material with a sealant that either binds the asbestos fibers together or coats the material so that fibers are not released. Pipe, furnace and boiler insulation can sometimes be repaired this way. This should be done only by a professional trained to handle asbestos safely. Covering (enclosure) involves placing something over or around the material that contains asbestos to prevent the release of fibers. Exposed insulated piping may be covered with a protective wrap or jacket. With any type of repair, the asbestos remains in place. Repair is usually cheaper than removal, but it may make removal of asbestos later (if found to be necessary) more difficult and costly. Repairs can either be major or minor. Major repairs must be done only by a professional trained in methods for safely handling asbestos. Minor repairs should also be done by professionals, since there is always a risk of exposure to fibers when asbestos is disturbed.

Repairs 

Doing minor repairs yourself is not recommended, since improper handling of asbestos materials can create a hazard where none existed. If you nevertheless choose to do minor repairs, you should have as much information as possible on the handling of asbestos before doing anything. Contact your state or local health department or regional EPA office for information about asbestos training programs in your area. Your local school district may also have information about asbestos professionals and training programs for school buildings. Even if you have completed a training program, do not try anything more than minor repairs. Before undertaking minor repairs, carefully examine the area around the damage to make sure it is stable. As a general rule, any damaged area which is bigger than the size of your hand is not considered a minor repair.

Before undertaking minor repairs, be sure to follow all the precautions described previously for sampling asbestos material. Always wet the asbestos material using a fine mist of water containing a few drops of detergent. Commercial products designed to fill holes and seal damaged areas are available. Small areas of material, such as pipe insulation, can be covered by wrapping a special fabric, such as re-wettable glass cloth, around it. These products are available from stores (listed in the telephone directory under “Safety Equipment and Clothing”) which specialize in asbestos materials and safety items.

Removal is usually the most expensive method and, unless required by state or local regulations, should be the last option considered in most situations. This is because removal poses the greatest risk of fiber release. However, removal may be required when remodeling or making major changes to your home that will disturb asbestos material. Also, removal may be called for if asbestos material is damaged extensively and cannot be otherwise repaired. Removal is complex and must be done only by a contractor with special training. Improper removal may actually increase the health risks to you and your family.

Asbestos Professionals: Who Are They and What Can They Do?

Asbestos professionals are trained in handling asbestos material. The type of professional will depend on the type of product and what needs to be done to correct the problem. You may hire a general asbestos contractor or, in some cases, a professional trained to handle specific products containing asbestos.

Asbestos professionals can conduct home inspections, take samples of suspected material, assess its condition, and advise on the corrections that are needed, as well as who is qualified to make these corrections. Once again, material in good condition need not be sampled unless it is likely to be disturbed. Professional correction or abatement contractors repair and remove asbestos materials.

Some firms offer combinations of testing, assessment and correction. A professional hired to assess the need for corrective action should not be connected with an asbestos-correction firm. It is better to use two different firms so that there is no conflict of interest. Services vary from one area to another around the country.

The federal government offers training courses for asbestos professionals around the country. Some state and local governments also offer or require training or certification courses. Ask asbestos professionals to document their completion of federal or state-approved training. Each person performing work in your home should provide proof of training and licensing in asbestos work, such as completion of EPA-approved training. State and local health departments or EPA regional offices may have listings of licensed professionals in your area.

If you have a problem that requires the services of asbestos professionals, check their credentials carefully. Hire professionals who are trained, experienced, reputable and accredited — especially if accreditation is required by state or local laws. Before hiring a professional, ask for references from previous clients. Find out if they were satisfied. Ask whether the professional has handled similar situations. Get cost estimates from several professionals, as the charges for these services can vary.

Though private homes are usually not covered by the asbestos regulations that apply to schools and public buildings, professionals should still use procedures described in federal or state-approved training. Homeowners should be alert to the chance of misleading claims by asbestos consultants and contractors. There have been reports of firms incorrectly claiming that asbestos materials in homes must be replaced. In other cases, firms have encouraged unnecessary removal or performed it improperly. Unnecessary removal is a waste of money. Improper removal may actually increase the health risks to you and your family. To guard against this, know what services are available and what procedures and precautions are needed to do the job properly.

In addition to general asbestos contractors, you may select a roofing, flooring or plumbing contractor trained to handle asbestos when it is necessary to remove and replace roofing, flooring, siding or asbestos-cement pipe that is part of a water system. Normally, roofing and flooring contractors are exempt from state and local licensing requirements because they do not perform any other asbestos-correction work.

Asbestos-containing automobile brake pads and linings, clutch facings and gaskets should be repaired and replaced only by a professional using special protective equipment. Many of these products are now available without asbestos.

If you hire a corrective-action contractor:

  • Check with your local air pollution control board, the local agency responsible for worker safety, and the Better Business Bureau. Ask if the firm has had any safety violations. Find out if there are legal actions filed against it.
  • Insist that the contractor use the proper equipment to do the job. The workers must wear approved respirators, gloves and other protective clothing.
  • Before work begins, get a written contract specifying the work plan, cleanup, and the applicable federal, state and local regulations which the contractor must follow (such as notification requirements and asbestos disposal procedures). Contact your state and local health departments, EPA regional office, and the Occupational Safety and Health Administration’s regional office to find out what the regulations are. Be sure the contractor follows local asbestos removal and disposal laws. At the end of the job, get written assurance from the contractor that all procedures have been followed.
  • Assure that the contractor avoids spreading or tracking asbestos dust into other areas of your home. They should seal off the work area from the rest of the house using plastic sheeting and duct tape, and also turn off the heating and air conditioning system. For some repairs, such as pipe insulation removal, plastic bags may be adequate. They must be sealed with tape and properly disposed of when the job is complete.
  • Make sure the work site is clearly marked as a hazardous area. Do not allow household members or pets into the area until work is completed.
  • Insist that the contractor apply a wetting agent to the asbestos material with a hand sprayer that creates a fine mist before removal. Wet fibers do not float in the air as easily as dry fibers and will be easier to clean up.
  • Make sure the contractor does not break removed material into smaller pieces. This could release asbestos fibers into the air. Pipe insulation was usually installed in pre-formed blocks and should be removed in complete pieces.
  • Upon completion, assure that the contractor cleans the area well with wet mops, wet rags, sponges and/or HEPA (high-efficiency particulate air) vacuum cleaners. A regular vacuum cleaner must never be used. Wetting helps reduce the chance of spreading asbestos fibers in the air. All asbestos materials and disposable equipment and clothing used in the job must be placed in sealed, leakproof, and labeled plastic bags. The work site should be visually free of dust and debris. Air monitoring (to make sure there is no increase of asbestos fibers in the air) may be necessary to assure that the contractor’s job is done properly. This should be done by someone not connected with the contractor.

Caution! 

Do not dust, sweep or vacuum debris that may contain asbestos. These actions will disturb tiny asbestos fibers and may release them into the air. Remove dust by wet-mopping or with a special HEPA vacuum cleaner used by trained asbestos contractors.

Article information by Nachi.org

Signature Home Inspection is a Certified Home Inspection service located in California serving Orange County, San Diego County, Los Angeles County, Riverside County, Santa Clara County, San Mateo County, San Francisco County, Contra Costa County, and San Bernardino County California.

www.signaturemore.com                                               888-860-2688

Air Quality in the Home – Indoor air quality is generally worse than most people believe, but there are things you can do about it.

Indoor Air Quality

Indoor Air Quality

 

Some Quick Facts:

  • Indoor air quality can be worse than that of outdoor air.
  • Problems can arise from moisture, insects, pets, appliances, radon, materials used in household products and furnishings, smoke, and other sources.
  • Effects range from minor annoyances to major health risks.
  • Remedies include ventilation, cleaning, moisture control, inspections, and following manufacturers’ directions when using appliances and products.

Research has shown that the quality of indoor air can be worse than that of outdoor air. Many homes are built or remodeled more tightly, without regard to the factors that assure fresh and healthy indoor air. Our homes today contain many furnishings, appliances and products that can affect indoor air quality.

Signs of indoor air quality problems include:

  • unusual and noticeable odors;
  • stale or stuffy air;
  • a noticeable lack of air movement;
  • dirty or faulty central heating or air-conditioning equipment;
  • damaged flue pipes and chimneys;
  • unvented combustion air sources for fossil-fuel appliances;
  • excessive humidity;
  • the presence of molds and mildew;
  • adverse health reaction after remodeling, weatherizing, bringing in new furniture, using household and hobby products, and moving into a new home; and
  • feeling noticeably healthier outside.

Common Sources of Air Quality Problems

Poor indoor air quality can arise from many sources. At least some of the following contaminants can be found in almost any home:

  • moisture and biological pollutants, such as molds, mildew, dust mites, animal dander, and cockroaches;
  • high humidity levels, inadequate ventilation, and poorly maintained humidifiers and air conditioners;
  • combustion products, including carbon monoxide, from unvented fossil-fuel space heaters, unvented gas stoves and ovens, and back-drafting from furnaces and water heaters;
  • formaldehyde from durable-press draperies and other textiles, particleboard products, such as cabinets and furniture framing, and adhesives;
  • radon, which is a radioactive gas from the soil and rock beneath and around the home’s foundation, groundwater wells, and some building materials;
  • household products and furnishings, such as paints, solvents, air fresheners, hobby supplies, dry-cleaned clothing, aerosol sprays, adhesives, and fabric additives used in carpeting and furniture, which can release volatile organic compounds (VOCs);
  • asbestos, which is found in most homes more than 20 years old. Sources include deteriorating, damaged and disturbed pipe insulation, fire retardant, acoustical material (such as ceiling tiles) and floor tiles;
  • lead from lead-based paint dust, which is created when removing paint by sanding, scraping and burning;
  • particulates from dust and pollen, fireplaces, wood stoves, kerosene heaters and unvented gas space heaters; and
  • tobacco smoke, which produces particulates, combustion products and formaldehyde.

Remedies to Indoor Air Quality Problems

Living Areas

Paneling, pressed-wood furniture, and cabinetry may release formaldehyde gas.

Remedy: Ask about formaldehyde content before buying furniture and cabinets. Some types of pressed-wood products, such as those with phenol resin, emit less formaldehyde. Also, products coated with polyurethane or laminates may reduce formaldehyde emissions. After installation, open windows. Maintain moderate temperature and humidity.

Biological pollutants can grow on water-damaged carpet. New carpet can release organic gases.

Remedy: Promptly clean and dry water-damaged carpet, or remove it altogether. If adhesives are needed, ask for low-emitting ones. During installation, open doors and windows, and use window fans or room air conditioners. Vacuum regularly. Consider area rugs instead of wall-to-wall carpet. Rugs are easier to remove and clean, and the floor underneath can also be cleaned.

Some floor tiles contain asbestos.

Remedy: Periodically inspect for damage or deterioration. Do not cut, rip, sand or remove any asbestos-containing materials. If you plan to make changes that might disturb the asbestos, or if materials are more than slightly damaged, contact a professional for repair or removal. Call your local or state health department or the Environmental Protection Agency.

Moisture encourages biological pollutants including allergens, such as mold, mildew, dust mites and cockroaches.

Remedy: If possible, eliminate moisture sources. Install and use exhaust fans. Use a dehumidifier, if necessary. Remove molds and mildew by cleaning with a solution of chlorine bleach (1 cup bleach to 1 gallon water). Maintain fresh air with natural and mechanical air circulation.

Your fireplace can be a source of carbon monoxide and combustion pollutants.

Remedy: Open the flue when using the fireplace. Have the flue and chimney inspected annually for exhaust back-drafting, flue obstructions, cracks, excess creosote, and other damage. Install smoke and carbon monoxide detectors.

An air conditioner can be a source of biological allergens.

Remedy: If there is a water tray, empty and clean it often. Follow all service and maintenance procedures, including changing the filter.

Gas and kerosene space heaters can release carbon monoxide and combustion pollutants.

Remedy: Never use unvented kerosene or gas space heaters. In the room where the heater is located, provide fresh air by opening a door to the rest of the house, turning on an exhaust fan, and slightly opening a window.

Tobacco smoke contains harmful combustion and particulate pollutants, including carbon monoxide and combustion byproducts.

Remedy: Do not smoke in your home or permit others to do so, especially near children. If smoking cannot be avoided indoors, open windows and use exhaust fans.

New draperies may be treated with a formaldehyde-based finish and emit odors for a short time.

Remedy: Before hanging, air draperies to ventilate odors. After hanging, ventilate the area. Maintain moderate temperature and humidity.

Paint manufactured before l978 may contain lead.

Remedy: Leave lead-based paint undisturbed if it is in good condition. Before removing paint, test for lead. Do-it-yourself lead test kits are available from hardware and building supply stores. Do not sand, burn off or remove lead-based paint yourself. Hire a person with special training to correct lead-based paint problems. For more information, call 1-800-LEAD-FYI.

Many animals create airborne allergens, such as dander, hair, feathers and skin.

Remedy: Keep pets outdoors as much as possible. Clean the entire house regularly. Deep-clean areas where pets are permitted. Bathe pets regularly.

Biological allergens caused by dust mites can trigger asthma.

Remedy: Clean and vacuum regularly. Wash bedding in water hotter than 130 degrees F. Use more hard-surface finishes; they are less likely to attract and hold dust mites.

Kitchen

Unhealthy and irritating vapors may be released from chemicals in household cleaners and similar products. Remedy: Select nonaerosol and non-toxic products. Use, apply, store and dispose of them according to manufacturers’ directions. If products are concentrated, label the storage container with dilution instructions. Use up a product completely before discarding its container.

Pressed-wood cabinets can be a source of formaldehyde vapor.

Remedy: Maintain moderate temperatures (80 degrees maximum) and humidity (about 45%). When purchasing new cabinets, select solid wood or metal cabinets, or those made with phenol resin; they emit less formaldehyde. Ventilate well after installation.

Unvented gas stoves and ranges are sources of carbon monoxide and combustion byproducts.

Remedy: Keep appliance burners clean. Have burners periodically adjusted (blue-flame tip, not yellow). Install and use an exhaust fan. Never use a gas range or stove to heat your home.

Bathroom

Organic gases are released from chemicals in some personal care products, such as deodorant, hair spray, shampoo, toner, nail polish and perfumes.

Remedy: Select odor-free or low odor-producing products. Select nonaerosol varieties. Open a window, or use an exhaust fan. Follow manufacturers’ directions when using the product and disposing of containers.

Air fresheners can release organic gases.

Remedy: Open a window or use the exhaust fan. Follow manufacturers’ directions. Select natural products.

Bedroom

Humidifiers and cold-mist vaporizers can encourage biological allergens, including mold, mildew and cockroaches, that can trigger asthma, and encourage the spread of viruses and the growth of bacteria.

Remedy: Use and clean these appliances according to manufacturers’ directions. Refill daily with fresh water.

Moth repellents often contain the pesticide paradichlorobenzene.

Remedy: Avoid breathing vapors. Place them in tightly sealed trunks or other containers. Store separately, away from living areas.

Chemicals used in the dry-cleaning process release organic gases.

Remedy: Bring any odors to the attention of your dry cleaner. Try to air out dry-cleaned goods before bringing them indoors. Seek alternatives to dry cleaning, such as hand washing items.  Consider using green dry cleaners who use newer, non-toxic solvents and methods to clean garments.

Utility Room

Unvented gas clothes dryers produce carbon monoxide and combustion byproducts and can be a fire hazard. Remedy:Regularly dispose of lint around and under the dryer. Provide air for gas units. Vent the dryer directly to the outdoors. Clean the lint trap, vent and ductwork regularly.

Gas and oil furnaces and boilers, and gas water heaters can produce air-quality problems which include back-drafting of carbon monoxide and combustion pollutants.

Remedy: Have your heating system and water heater, including gas piping and venting, inspected every year.

Asbestos pipe wrap and furnace insulation can release asbestos fibers into the air.

Remedy: Periodically check for damage and deterioration. Do not cut, rip, sand or remove any asbestos-containing materials. If you plan to make changes that might disturb the asbestos, or if materials are more than slightly damaged, contact a professional for repair or removal.

Basement

Ground moisture encourages biological allergens, including mold and mildew.

Remedy: Inspect for condensation on walls, standing water on the floor, and sewage leaks. To keep the basement dry, prevent outside water from entering indoors by installing roof gutters and downspouts, by not watering close to the foundation, by grading soil away from the home, and by applying waterproofing sealants to the basement’s interior walls. To prevent the accumulation of standing water, consider installing a sump pump. If sewage is the source of water intrusion, have drains professionally cleaned. If moisture has no obvious source, install an exhaust fan controlled by humidity levels. Remove mold and mildew. Regularly clean and disinfect the basement floor drain.

Radon is an invisible, radioactive gas which poses the risk of lung cancer.

Remedy: Test your home for radon. Do-it-yourself kits are inexpensive and easy to use. Have an experienced radon contractor mitigate your home if your radon level is 4 picocuries per liter (pCi/L) or higher.

Chemicals in hobby products, such as solvents, paint, glue and epoxy, release organic gases. Remedy: Follow manufacturers’ directions for use, ventilation, application, clean-up, and container storage and disposal. Use outdoors when possible. When using indoors, open a window or use an exhaust fan. Re-seal containers tightly. Clean tools outside or in a well-ventilated area.

Garage

Car and small engine exhaust are sources of carbon monoxide and combustion byproducts.

Remedy: Never leave vehicles, lawn mowers, snowmobiles, etc., running in the garage.

Paint, solvent and cleaning supplies may release harmful vapors.

Remedy: Provide ventilation when using them. Follow manufacturers’ directions. Buy only as much as you need. If the products contain methylene chloride, such as paint strippers, use them outdoors. Re-seal containers well. Keep products in their original, labeled containers. Clean brushes and other materials outside.  Opt for non-toxic green products whenever possible.

Pesticides and fertilizers used in the yard and garden may be toxic.

Remedy: Use non-chemical methods whenever possible. Follow manufacturers’ directions for mixing, applying and storing.  Wear protective clothing. Mix or dilute these products outdoors. Provide ventilation when using them indoors. Store them outside of the home in their original, labeled containers. After using the product, remove your shoes and clean your hands and clothing to avoid bringing the chemicals into your home.

Smoke and Carbon Monoxide Detectors

  • Install a smoke detector in each bedroom or in the adjacent hallway.
  • If you have gas or other fossil-fuel appliances in the house, install carbon monoxide detectors in these locations.
  • Combination smoke and carbon monoxide detectors are available.
  • Check the batteries frequently, at least annually.

Amount of Ventilation

If too little outdoor air enters a home, pollutants can accumulate to levels that can pose health and comfort problems. Unless they are built with a special mechanical means of ventilation, homes that are designed and constructed to minimize the amount of outdoor air that can “leak” into and out of the home may have higher pollutant levels than other homes. However, because some weather conditions can drastically reduce the amount of outdoor air that enters a home, pollutants can build up even in homes that are normally considered “leaky.”

How Does Outdoor Air Enter a House?

Outdoor air enters and leaves a house by infiltration, natural ventilation and mechanical ventilation. In a process known as infiltration, outdoor air flows into the house through openings, joints and cracks in walls, floors and ceilings, and around windows and doors. In natural ventilation, air moves through opened windows and doors. Air movement associated with infiltration and natural ventilation is caused by air-temperature differences between the indoors and outdoors, and by wind. Finally, there are a number of mechanical ventilation devices, from outdoor-vented fans that intermittently remove air from a single room, such as the bathroom and kitchen, to air-handling systems that use fans and ductwork to continuously remove indoor air and distribute filtered and conditioned outdoor air to strategic points throughout the house. The rate at which outdoor air replaces indoor air is described as the air-exchange rate. When there is little infiltration, natural ventilation or mechanical ventilation, the air-exchange rate is low and pollutant levels can increase.

Indoor Air Pollution and Health

Health effects from indoor air pollutants may be experienced soon after exposure or, possibly years later.

Immediate Effects

Immediate effects may show up after a single exposure, or it may take repeated exposures. These include irritation of the eyes, nose and throat, headaches, dizziness and fatigue. Such immediate effects are usually short-term and treatable. Sometimes, the treatment is simply eliminating the person’s exposure to the source of the pollution, if it can be identified. Symptoms of some diseases, including asthma, hypersensitivity pneumonitis, and humidifier fever, may also show up soon after exposure to some indoor air pollutants.

The likelihood of immediate reactions to indoor air pollutants depends on several factors. Age and pre-existing medical conditions are two important influences. In other cases, whether a person reacts to a pollutant depends on individual sensitivity, which varies tremendously from person to person. Some people can become sensitized to biological pollutants after repeated exposures, and it appears that some people can become sensitized to chemical pollutants, as well.

Certain immediate effects are similar to those from colds and other viral diseases, so it is often difficult to determine if the symptoms are a result of exposure to indoor air pollution. For this reason, it is important to pay attention to the time and place that symptoms occur. If the symptoms fade or go away when a person is away from home, for example, an effort should be made to identify indoor air sources that may be possible causes. Some effects may be made worse by an inadequate supply of outdoor air, or from the heating, cooling or humidity conditions prevalent in the home.

Long-Term Effects

Other health effects may show up years after exposure has occurred, or only after long or repeated periods of exposure. These effects, which include some respiratory diseases, heart disease and cancer, can be severely debilitating or fatal. It is prudent to try to improve the indoor air quality in your home even if symptoms are not noticeable.

While pollutants commonly found in indoor air are responsible for many harmful effects, there is considerable uncertainty about what concentrations or periods of exposure are necessary to produce specific health problems. People also react very differently to exposure to indoor air pollutants. Further research is needed to better understand which health effects occur after exposure to the average pollutant concentrations found in homes, and which occur from the higher concentrations over short periods of time.

In summary, indoor air contaminants can be a source of ill health. Hire an InterNACHI inspector trained in air quality to perform your next home inspection. 

Article information by Nachi.org

Signature Home Inspection is a Certified Home Inspection service located in California serving Orange County, San Diego County, Los Angeles County, Riverside County, Santa Clara County, San Mateo County, San Francisco County, Contra Costa County, and San Bernardino County California.

www.signaturemore.com                                               888-860-2688